DIGISEQ 64 Robust – 32/64 channels built in (no internal power)

£1,250.00

The FireByWire® DIGISEQ Robust 64 cue firing module.

Available in 2 versions:

The FireByWire® DIGISEQ is short for Digital Firing Sequencer and provides control in the firing site of your display as well as providing a safe, isolated interface between the power source and controlling computer.

The DIGISEQ allows for 4 modules of 16 cues (64 in total) to be controlled over the digital network via laptop and also standalone control where cues and timings can be programmed using the menu system alone and fired by the “trigger port”.

The trigger port accepts 12-36v from either a handheld single channel button type device or any other firing system output (e.g. instead of firing an igniter on the other system).

Once triggered the DIGISEQ waits for a time pre-programmed and then fires the next channel.  If the delay is programmed as 0s then it fires instantly.  If all delays are set to 0 then the DIGISEQ works in “step mode”.

DIGISEQ can also be used under laptop control for computerised displays and pyromusicals.

All 64 channels are available via a side connector.  You can plug into this firing modules to duplicate channels 1-32 (on top panel), and also access 33-64.

Example configuration:

fbw-robust starter